BCMTL - ACRYLOID,1019 OIL ADDITIVE
- MSDS: BCMTL
- Manufacturer: ROHM AND HAAS COMPANY
- Product Name: ACRYLOID,1019 OIL ADDITIVE
- National Stock Number: 6850-00N006438
Product Identification
Product ID:ACRYLOID,1019 OIL ADDITIVE
MSDS Date:01/01/1985
FSC:6850
NIIN:00N006438
MSDS Number: BCMTL
Responsible Party
Emergency Phone: 215-592-3000
Cage: FO048
Contractor
Telephone: 215-592-2521/215-592-3000
Cage: 77902
Ingredients
ACRYLIC COPOLYMERS
Fraction By Weight: 71%
NEUTRAL OIL
Fraction By Weight: 29%
ACGIH TLV: 5 MG/CUM OIL MS
Hazards
Effects of Overexposure:EYE/SKIN: IRRITATION.
First Aid
First Aid:EYE: FLUSH WITH WATER 15 MINUTES, CONSULT PHYSICIAN IF
IRRITATION PERSISTS. SKIN: WASH WITH SOAP & WATER, REMOVE
CONTAMINATED CLOTHING.
Fire Fighting
Flash Point:375F/190C
Extinguishing Media:FOAM,CO*2,DRY CHEM,WATER SPRAY
Fire Fighting Procedures:SELF-CONTAIN BREATH APP, FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:TOXIC FUMES MAY BE GIVEN OFF WHEN
MATERIAL IS EXPOSED TO FIRE.
Accidental Release
Spill Release Procedures:DIKE & CONTAIN SPILL WITH INERT MATERIAL.
TRANSFER LIQUID TO CONTAINERS FOR RECOVERY OR DISPOSAL & SOLID
DIKING MATERIAL TO SEPARATE CONTAINER FOR DISPOSAL. FLOOR MAY BE
SLIPPERY. KEEP SPILL & CLEAN R UNOFF OUT OF MUNICIPAL SEWERS & OPEN
BODY OF WATER
Handling
Handling and Storage Precautions:STORE AT TEMPS BELOW 200F/93C. LOW
TEMPERATURE STORAGE WILL INCREASE VISCOSITY OF THIS MATERIAL.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:GENERAL
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYEWASH FACILITY
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:600F/316C
Vapor Pres:<1
Spec Gravity:0.89
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR VISCOUS LIQUID; SWEET ODOR
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Disposal
Waste Disposal Methods:BY METHODS CONSISTENT WITH LOCAL, STATE &
FEDERAL REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.